Removing the Rear AC Unit From a Conversion Van
What do you do with the rear ac unit air handler in a conversion van? We go over the process and pros/cons for removing it or leaving it in and building around it.
Wondering exactly how we built our van? This is place for you! We go over everything that we did – and we hope it helps you with your build.
What do you do with the rear ac unit air handler in a conversion van? We go over the process and pros/cons for removing it or leaving it in and building around it.
Trying to figure out how to mount an awning onto your van? We’ve got you covered. Read on to see how we mounted an ARB awning without a roof rack.
After 7 months of living in our van, we know what works and what doesn’t. Here’s 5 things we’d change about our build, and 5 things we’ll never change.
Choosing and installing the water in your van can be intimidating. Read on for instructions on how we installed a foot pump system in our DIY van build.
The Fan-Tastic Vent is highly recommended among RVers. But is it the best choice of vent fan if you live in your vehicle full time? Read on to find out!
The kitchen is an essential part of any van build. See how we built multi-functional kitchen cabinets the look great and are fully customized for our van!
Modern AGM batteries are uber-safe, but there are still many good reasons for a battery box. See how we built a plywood battery box for our van build!
A queen sized bed? IN A VAN?!? Read our in-depth post to see how we managed to fit a big, comfy bed in our van build and still have plenty of space.
Want the strongest, lightest furniture for your van build? Try pocket hole construction! Check out our guide on using pocket holes in your van build.
Wondering what stove, fridge, sink, faucet, and water tank to get for your van build? In this post, we go over everything we put in our van’s kitchen.
Stain really enhances the natural beauty of wood and makes the grain pop. Check out how we stained the inside of our van and made it feel like a log cabin.
The ceiling is one of the most visible and customizable parts of any van. Follow along as we hang some great-looking cedar paneling on our van’s ceiling.
A van interior isn’t complete without walls. Check out how we measured, cut, and installed 1/4″ plywood paneling in our van in this step-by-step post.
Read on to see how we laid down a subfloor, installed beautiful Tarkett T-Lock laminate flooring and amped up the awesomeness in our van!
Ventilation is essential for van life. Follow along as we cut a hole in our roof and install a Fan-Tastic vent fan in our high top conversion van!
Mounting solar panels to the curved fiberglass roof of a high top conversion van isn’t exactly simple. Read on to find out how we did it.
Insulation is an important part of any van build. Here’s how we insulated our van, including tips, tricks, photos and step-by-step instructions.
The first step in our van build was gutting our van and taking out the wheelchair lift. Find out how we did it and hear the tricks we learned along the way.
End of content
End of content